Agilent Technologies 1100 Series User Manual

48 1100 Series DAD and MWD User Manual
3 LAN Configuration
3 Type ? and press enter to see the available commands.
Figure 20 Telnet Commands
4 To change a parameter follows the style:
parameter value
for example: ip 134.40.27.230
then press [Enter], where parameter refers to the configuration parameter
you are defining, and value refers to the definitions you are assigning to
that parameter. Each parameter entry is followed by a carriage return.
Table 9 Telnet Commands
Value Description
? displays syntax and descriptions of commands
/ displays current LAN settings
ip <x.x.x.x> sets new ip address
sm <x.x.x.x> sets new subnet mask
gw <x.x.x.x> sets new default gateway
exit exits shell and saves all changes

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English