6 1100 Series DAD and MWD User Manual
PC and Agilent ChemStation Setup 54
PC Setup for Local Configuration 54
Agilent ChemStation Setup 55
4 Using the Detector
Setting up an Analysis 58
Before Using the System 58
Requirements and Conditions 60
Optimization of the System 62
Preparing the HPLC System 63
Running the Sample and Verifying the Results 72
Special Settings of the Detector 73
Control Settings 73
Configuration Settings 74
Online Spectra 75
Run Recovery Settings 76
Analog Output Settings 79
Spectrum Settings 80
Peakwidth Settings 82
Slit Settings 83
Margin for Negative Absorbance Settings 84
Optimizing the Detector 84
Special Setups with Multiple DAD/MWDs 85
Two detectors of same type (e.g. G1315C and G1315C) 85
Two detectors of similar type (e.g. G1315C and G1315A/B) 85
5 How to optimize the Detector
Optimizing the Detector Performance 88
Optimization Overview 89
Optimizing for Sensitivity, Selectivity, Linearity and Dispersion 91
Flow Cell Path Length 91
To Next Page
Loading...
Need help?
General
