About This Guide
xiv Measurements Reference Guide
Chapter 7 Squareness Measurements in a Vertical Plane —
Explains how to determine if two machine parts in a vertical plane move
perpendicular to each other.
Chapter 8 Parallelism Measurements —
Explains how to determine if two machine parts move parallel to each
other. The chapter includes both spindle and coplanar parallelism
measurements.
Chapter 9 Flatness Measurements —
Explains how to determine if a surface plate is flat.
Chapter 10 Way Straightness Measurements —
Explains how to determine if a machine part, such as a milling machine
way, is straight.
Chapter 11 Diagonal Measurements —
Explains how to make diagonal measurements, used for volume analysis.
Appendix A Operating Specifications —
Lists operating specifications for the Agilent 5530 hardware. It also lists
environmental compensation specifications.
Index
To Next Page
Loading...
