Important Information
Miscellaneous
Released: March 2004 6850 Series II GC User Information page 12 of 256
3. Plug the device into a different electrical outlet, so that the device and the
radio or television are on separate electrical circuits.
4. Make sure that all peripheral devices are also certified.
5. Make sure that appropriate cables are used to connect the device to
peripheral equipment.
6. Consult your equipment dealer, Agilent Technologies, or an experienced
technician for assistance.
7. Changes or modifications not expressly approved by Agilent Technologies
could void the user’s authority to operate the equipment.
Miscellaneous
Fuses and batteries
Table 2 and Table 3 list the fuses and batteries required for proper operation.
These should only be accessed by Agilent service personnel.
Table 2. AC Board Fuses
Table 3. Main Board Fuses
The battery on the main board is BT1, 3-volt lithium battery, Panasonic
BR3032.
Cleaning
To clean the exterior of the unit, disconnect the power and wipe down with a
damp, lint-free cloth.
Recycling the product
For recycling, contact your local Agilent sales office.
Fuse designation Line voltage Fuse rating and type
F1, F2 All 6 A, glass body, IEC Type F, non-time delay
F3, F4 All, regular oven
All, fast-heating oven
15 A, ceramic body, IEC Type F, non-time delay
20 A, ceramic body, IEC Type F, non-time delay
Fuse designation Fuse rating and type
F1, F2, F3
5 A, 250 VAC, IEC 127 type f (non-time delay), ceramic body
To Next Page
Loading...
Need help?
General
