Operation Manual 3
About This Manual
This manual contains information for operating and
maintaining the Agilent 7200 Accurate-Mass Quadrupole
Time-of-Flight GC/MS system.
1 “Introduction”
Chapter 1 describes general information about the 7200 Q-TOF
GC/MS, including a hardware description, and general safety
warnings.
2 “Installing GC Columns”
Chapter 2 shows you how to prepare a capillary column for use
with the MS, install it in the GC oven, and connect it to the MS
using the GC/MS interface.
3 “Operating in Electron Impact (EI) Mode”
Chapter 3 describes routine operations in EI mode such as
setting temperatures, monitoring pressures, tuning, venting,
and pumpdown.
4 “Operating in Chemical Ionization (CI) Mode”
Chapter 4 describes additional tasks necessary to operate in CI
mode.
5 “Using the Removable Ion Source”
Chapter 5 shows you how to change the removable ion source.
6 “General Maintenance”
Chapter 6 describes general maintenance procedures for the
7200 Q-TOF GC/MS.
To Next Page
Loading...
