Agilent Technologies 7200 User Manual

Operating in Chemical Ionization (CI) Mode 4
To Operate the Reagent Gas Flow Control Module
Operation Manual 85
To Operate the Reagent Gas Flow Control Module
Procedure
1 In Instrument Control panel, select the MS Tune icon to display
the GC/Q-TOF Tune dialog box. Select the Manual Tune tab then
select the Ion Source tab to display the ion source parameters.
Figure 23 CI flow control

Agilent Technologies 7200 Specifications

General

Brand	Agilent Technologies
Model	7200
Category	Laboratory Equipment
Language	English