Agilent Technologies 7200 User Manual

20 Operation Manual
1 Introduction
Safety and Regulatory Certifications
Safety and Regulatory Certifications
The 7200 Q-TOF GC/MS conforms to the following safety
standards:
• Canadian Standards Association (CSA): CAN/CSA-C22.2 No.
61010-1-04
• CSA/Nationally Recognized Test Laboratory (NRTL):
UL 61010–1
• International Electrotechnical Commission (IEC): 61010–1
• EuroNorm (EN): 61010–1
The 7200 Q-TOF GC/MS conforms to the following regulations
on Electromagnetic Compatibility (EMC) and Radio Frequency
Interference (RFI):
• CISPR 11/EN 55011: Group 1, Class A
• IEC/EN 61326-1
• AUS/NZ
This ISM device complies with Canadian ICES-001. Cet appareil
ISM est conforme a la norme NMB—001 du Canada.
The 7200 Q-TOF GC/MS is designed and manufactured under a
quality system registered to ISO 9001.
Information
The Agilent Technologies 7200 Accurate-Mass Q-TOF GC/MS
meets the following IEC (International Electrotechnical
Commission) classifications: Equipment Class I, Laboratory
Equipment, Installation Category II, and Pollution Degree 2.
This unit has been designed and tested in accordance with
recognized safety standards and is designed for use indoors. If
the instrument is used in a manner not specified by the
manufacturer, the protection provided by the instrument may
be impaired. Whenever the safety protection of the MS has been
compromised, disconnect the unit from all power sources and
secure the unit against unintended operation.

Agilent Technologies 7200 Specifications

General

Brand	Agilent Technologies
Model	7200
Category	Laboratory Equipment
Language	English