Operation Manual 7
The Flow Control Module 82
To Switch from the EI Mode to CI Mode 83
To Operate the Reagent Gas Flow Control Module 85
To Set a Reagent Gas Flow 87
To Perform a CI Autotune 88
5 Using the Removable Ion Source
The Removable Ion Source 92
To Change the Ion Source 94
To Install the RIS Probe Extraction Tool 97
To Remove the Source from the Analyzer Chamber 99
To Change the Ion Source on the RIS Probe Extraction Tool 101
To Install the Ion Source in the Analyzer Chamber 103
To Remove the RIS Probe Extraction Tool from the
Instrument 104
6 General Maintenance
Before Starting 106
Maintaining the Vacuum System 111
Maintaining the Analyzer 112
To Disassemble the EI Ion Source 114
To Assemble the EI Ion Source 116
To Disassemble the CI Ion Source 118
To Assemble the CI Ion Source 120
To Clean the Ion Source 122
To Remove a Filament 126
To Install a Filament 128
To Next Page
Loading...
