116 Agilent 8453 Dissolution Testing System Installing and Operating Manual
5 Parts for Dissolution Testing
Parts for Dissolution Testing
See Table 7 on page 23 for details of fittings.
Multicell system tubing kit
‡
5042-1330
Valve system tubing kit
**
5042-1331
Dissolution probe kit
††
5042-1332
Teflon tubing kit, 0.8 mm inner diameter, 1.6 mm outer diameter (10 m) 5041-2191
Peek fittings and ferrules for 8-port valve (10/pk) 5042-1337
Tefzel ferrules (10/pk) 5022-2154
Conical adapter kit, connects teflon tubing to pump tubing (2/pk) 5022-2157
Cell fittings, (8/pk, 4 short and 4 long fittings) 5022-2156
Fittings, nuts (10/pk) 5022-2158
Unions (10/pk) 5022-2155
Peristaltic pump tubing, 2.06 mm inner diameter (12) 5041-2166
* For part numbers of cell fittings and ferrules, tubing fittings, ferrules, conical adapters and unions,
see the UV-visible section of Agilent’s Accessories and Supplies for UV-visible Spectroscopy Cata-
log.
† Supplied with pre assembled tubing and fittings.
‡ Supplied with pre assembled tubing and fittings.
** Supplied with pre assembled tubing and fittings.
†† Supplied pre assembled.
Tab le 37 Handbooks
Description Part Number
Agilent 8453 UV-visible Spectroscopy System
Installation Guide
G1115-90034
Agilent 8453 UV-visible Spectroscopy System
Service Manual
G1103-90004
Tab le 36 Ordering Information for Replacement Parts and Tubing Kits
*
(continued)
Description Part Number
To Next Page
Loading...
Need help?
General
