Agilent 8453 Dissolution Testing System Installing and Operating Manual 35
Setting Up 2
Installing a Multicell-transport-based Sampling System
Part Numbers
See Table 7 on page 23 for details of fittings.
Tab le 10 Ordering Information for Replacement Parts and Tubing Kits
*
* For part numbers of cell fittings and ferrules, tubing fittings, ferrules, conical adapters and unions,
see the UV-visible section of Agilent’s Accessories and Supplies for UV-visible Spectroscopy Cata-
log.
Description Part Number
Eight-position multicell transport G1120A
Peristaltic pump 8VS drive assembly, 115 V 89092-60001
Peristaltic pump 8VS drive assembly, 230 V 89092-60002
Peristaltic pump 8VS pressure-wheel assembly 8 channel 89092-60003
Peristaltic pump–remote cable G1103-61607
Filter tips (pack of 1000) 5181-1246
Flow cell, 1 mm path length 5063-6570
Multicell tubing kit
†
† Supplied with pre assembled tubing and fittings.
5042-1330
Peristaltic pump tubing, 2.06 mm inner diameter (12) 5041-2166
Dissolution probe kit
‡
‡ Supplied pre assembled.
5042-1332
Teflon tubing kit, 0.8 mm inner diameter, 1.6 mm outer diameter (10 m) 5041-2191
To Next Page
Loading...
Need help?
General
