103
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started
GPRS Mobile Measurements
GPRS Mobile Measurements
The following step-by-step procedures explain how to perform specific measurements
available on the GPRS Test Application. A detailed description of each measurement
is given in the Reference information on the documentation CD-ROM and at the
Agilent 8960 support website (http://www.agilent.com/find/8960support/).
Setup parameters for each measurement are assumed to be set to their default (Full
preset) values unless otherwise stated.
The following measurement procedures are provided:
• “Measuring Transmit Power” on page 104
• “Measuring Power versus Time” on page 105
• “Measuring Phase and Frequency Error” on page 113
• “Measuring Output RF Spectrum” on page 116
• “Measuring Bit Error” on page 121
To Next Page
Loading...
