22
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\is136_gen_op_overview_make_meas.fm
How Do I Make Measurements on a Mobile?
How Do I Make Measurements on a Mobile?
A. Establish a call.
1. Press the blue SHIFT key.
2. Press the green
PRESET key.
3. Connect the mobile to the RF IN/OUT port.
4. Turn the mobile on and wait for it to camp.
5. On the mobile, press 1, 2, 3, then press send.
6. Check for Connected in the Active Cell Status: field.
6
2
1
3
To Next Page
Loading...
