36
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\is136_man_measurements.fm
AMPS/136 Mobile Measurements
AMPS/136 Mobile Measurements
The following step-by-step procedures explain how to perform specific measurements
available on the AMPS/136 Test Application. A detailed description of each
measurement is given in the Reference information on the documentation CD-ROM
and at the Agilent 8960 support website (www.agilent.com/find/8960support).
Setup parameters for each measurement are assumed to be set to their default (full
preset) values unless otherwise stated.
The following measurement procedures are provided:
• “Measuring Digital Transmit Power” on page 37
• “Measuring Modulation Accuracy” on page 38
• “Measuring Adjacent Channel Power” on page 39
• “Measuring Bit Error Ratio” on page 40
• “Measuring IQ Tuning” on page 41
• “Measuring Analog Transmit Power” on page 43
• “Measuring Frequency Stability” on page 44
• “Measuring Frequency Modulation” on page 45
To Next Page
Loading...
Need help?
General
