Agilent Technologies 8960 Series - Changing MS TX Level

97
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started
How Do I Change the MS TX Level?
How Do I Change the MS TX Level?
There are two ways to change the MS TX Level:
A. Change the level immediately
B. Change the level during a handover
Both are explained below.
A. Change the MS TX level immediately.
1. Press the CALL SETUP key.
2. On the Call Parms menu (3 of 4) press the MS TX Level (
F8) key.
3. Set a new MS TX level and press the knob.
4. Press the Close Menu (
F6) key.
1
3
2
4