88
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\GPRS_gen_op_overview_make_meas.fm
How Do I Make Measurements on a Mobile?
How Do I Make Measurements on a Mobile?
A. Establish a data connection.
1. Press the blue SHIFT key.
2. Press the green
Preset key.
3. Connect the mobile.
4. Turn the mobile on and wait for Attached in the Active Cell: field.
NOTE For mobiles that don’t perform GPRS attach automatically, set the
mobile to data mode.
5. Press the Start Data Connection (
F3) key and watch for the Active Cell:
field changing to Transferring.
4
2
1
3
5
To Next Page
Loading...
