96
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\GPRS_gen_op_overview_handover.fm
How Do I Perform a Handover?
How Do I Perform a Handover?
1. Press the CALL SETUP key.
2. Press the Handover Setup (
F5) key.
3. Change the various parameters, for example Traffic Band.
4. Press the Handover Execute (
F5) key to complete the handover, or press the
Close Menu (
F6) key to abort the handover.
5. Check for Transferring in the Active Cell: field.
6. Press the
More key to check that the changes have been implemented on the Call
Parms menus (2 of 4) and (3 of 4).
4
3
5
6
1
To Next Page
Loading...
