Agilent Technologies 8960 Series User Manual

66
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\cdma2000_gen_op_overview_sys_config.fm
How Do I Configure the Test Set for My Test System?
B. Set amplitude offsets.
1. On the Configuration Summary screen (not shown), press the RF IN/OUT Amptd
Offset (
F5) key.
2. On the RF IN/OUT Amplitude Offset screen, press the RF IN/OUT Amptd
Offset Setup (F2) key.
3. Enter the amplitude offset for the test frequencies you use.
4. Press the Close Menu (
F6) key.
2
4

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English