Agilent Technologies 8960 Series - Selecting Measurements

125
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started
How Do I Make Measurements on a Mobile?
B. Select measurements.
1. Press the Measurement selection key.
2. Highlight a measurement and press the knob.
3. Repeat steps 1 and 2 to add measurements.
1
The gray boxes
indicate that the
measurement is
being made, but
the results are
not being
displayed.
These black boxes indicate
that transmit power
measurement results are
being displayed in the
lower measurement
window, and phase and
frequency error
measurement results are
being displayed in the
upper measurement
window.