Agilent Technologies 8960 Series User Manual

52
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\cdma2000_gen_op_overview_setup_call.fm
How Do I Set Up a Call?
How Do I Set Up a Call?
• “How Do I Set Up an IS-2000 Call?” on page 52
• “How Do I Set Up an IS-95 Call?” on page 54
How Do I Set Up an IS-2000 Call?
The Call Parms keys and Call Control keys provide access to the parameters needed
to set up a call.
1. Press the
CALL SETUP key.
2. Press the Operating Mode (
F1) key and set the operating mode to Active Cell.
3. Press the System Type (
F2) key and select IS-2000.
4. Press the Cell Band (
F8) key and select the band in which you would like to bring
up the call.
5. Press the Radio Config (F11) key and select the radio configuration in which you
would like to bring up the call.
1
7
4
5
2
1
3
6
1

Agilent Technologies 8960 Series Specifications

General

Brand	Agilent Technologies
Model	8960 Series
Category	Test Equipment
Language	English