13
S:\Hp8960\Generic Documents\Manual Operation Getting Started Guide\Pi_manual operation getting started guide\chapters\titlepage.fm
Declaration of Conformity
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
For further information, please contact your local Agilent Technologies sales office, agent or distributor. Authorized
EU-representative: Agilent Technologies Deutschland, GmbH, Herrenberger Strabe 130, D 71034 Boblingen, Germany
Manufacturer’s Name Agilent Technologies, Incorporated Agilent Technologies, Incorporated
Manufacturer’s Address Electronics Products & Solutions
Group - Queensferry
South Queensferry
West Lothian, EH30 9TG
Scotland, United Kingdom
Declares, that the product
Product Name:
Model Number:
Product Options:
8960 Series 10 Wireless Communications
Test Set
E5515T
This declaration covers all options of the
above product.
Conforms with the following European Directives
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive
89/336/EEC (including 93/68/EEC) and carries the CD Marking accordingly.
Conforms with the following product standards:
EMC
Standard
IEC 61326-1:1997+A1:1998 / EN
61326-1:1997+A1:1998
CISPR 11:1990 / EN 55011:1991
IEC 61000-4-2:1995+A1:1998 / EN
61000-4-2:1995
IEC 61000-4-3:1995 / EN 61000-4-3:1995
IEC 61000-4-4:1995 / EN 61000-4-4:1995
IEC 61000-4-5:1995 / EN 61000-4-5:1995
IEC 61000-4-6:1996 / EN 61000-4-6:1996
IEC 61000-4-11:1994 / EN 61000-4-11:1994
Limit
Group 1 Class A
[1]
4kV CD, 8kV AD
3 V/m, 80-1000 MHz
0.5V signal lines, 1kV power lines
0.5 kV line-line, 1 kV line-ground
3V, 0.15-80 MHz
1 cycle, 100%
Safety IEC 61010-1:1990+A1:1992+A2:1995 / EN 61010-1:1993+A2:1995
Canada CSA C22.2 No. 1010.1:1992
Supplemental Information:
[1]
The product was tested in a typical configuration with Agilent Technologies test systems
14 December 2000
W. V. Roland / Reliability & Regulatory
Engineering Manager
To Next Page
Loading...
Need help?
General
