Reference Waveforms 5
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 101
One reference waveform can be displayed at a time.
See Also • "To display reference waveform information" on page 102
To scale and position reference waveforms
1 Make sure the multiplexed scale and position knobs to the right of the
[Ref] key are selected for the reference waveform.
If the arrow to the left of the [Ref] key is not illuminated, press the key.
2 Turn the upper multiplexed knob to adjust the reference waveform
scale.
3 Turn the lower multiplexed knob to adjust the reference waveform
position.
To adjust reference waveform skew
Once reference waveforms are displayed, you can adjust their skew.
To Next Page
Loading...
Need help?
General
