Utility Settings 19
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 299
• Quick Print — prints the current screen image. Press Settings to set up
the printing options. See Chapter 18, “Print (Screens),” starting on
page 279.
• Quick Save — saves the current image, waveform data, or setup. Press
Settings to set up the save options. See Chapter 17, “Save/Recall
(Setups, Screens, Data),” starting on page 263.
• Quick Recall — recalls a setup, mask, or reference waveform. Press
Settings to set up the recall options. See Chapter 17, “Save/Recall
(Setups, Screens, Data),” starting on page 263.
• Quick Freeze Display — freezes the display without stopping running
acquisitions or un- freezes the display if currently frozen. For more
information, see "To freeze the display" on page 133.
• Quick Trigger Mode — toggles the trigger mode between Auto and
Normal, see "To select the Auto or Normal trigger mode" on
page 178.
• Quick Clear Display — clears the display, see "To clear the display" on
page 132.
Once the [Quick Action] key is configured, you simply press it to perform
the selected action.
To Next Page
Loading...
Need help?
General
