279
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
s1
18
Print (Screens)
To print the oscilloscope's display 279
To set up network printer connections 280
To specify the print options 281
To specify the palette option 282
You can print the complete display, including the status line and softkeys,
to a USB printer or a network printer when the DSOXLAN LAN/VGA
module is installed.
The Print Configuration Menu is displayed when you press the [Print] key.
The print option softkeys and the Press to Print softkey are ghosted (not
available) until a printer is connected.
To print the oscilloscope's display
1 Connect a printer. You can:
• Connect a USB printer to either the USB port on the front panel or
the rectangular USB host port on the rear panel.
For the most up- to- date listing of printers that are compatible with
the InfiniiVision oscilloscopes, please visit
"www.agilent.com/find/InfiniiVision- printers".
• Set up a network printer connection. See "To set up network printer
connections" on page 280.
2 Press the [Print] key on the front panel.
3 In the Print Configuration Menu, press the Print to softkey; then, turn
the Entry knob to select the desired printer.
To Next Page
Loading...
Need help?
General
