100 PL-GPC 220 User Manual
7 Maintenance
Autosampler
Autosampler Track Lubrication
1 Pull out the carousel drawer and remove the carousel complete with all its
vial holders.
2 With a piece of tissue paper moistened with acetone, wipe clean the entire
track that the vial holders sit on.
3 Using a cotton bud (Q-tip®) sprinkle a small amount of graphite powder
over the track.
4 Replace the carousel and return the drawer to its operating position.
Tools required Description
Tissue
Cotton bud (Q-tip®)
Parts required Description
Actone
Graphite powder
To Next Page
Loading...
