PL-GPC 220 User Manual 71
Maintenance
7
Warnings and Cautions
Warnings and Cautions
Toxic, flammable and hazardous solvents, samples and reagents
The handling of solvents, samples and reagents can hold health and safety risks.
➔ When working with these substances observe appropriate safety procedures (for
example by wearing goggles, safety gloves and protective clothing) as described in
the material handling and safety data sheet supplied by the vendor, and follow good
laboratory practice.
➔ The volume of substances should be reduced to the minimum required for the
analysis.
➔ Do not operate the instrument in an explosive atmosphere.
Electric shock
Repair work at the module can lead to personal injuries, e.g. shock hazard, when the
cover is opened.
➔ Do not remove the instrument control drawer.
➔ Only certified persons are authorized to carry out repairs inside the module.
Fire and damage to the module
Wrong fuses
➔ Make sure that only fuses with the required rated current and of the specified type
(super-fast, fast, time delay etc) are used for replacement.
➔ The use of repaired fuses and the short-circuiting of fuse-holders must be avoided.
To Next Page
Loading...
Need help?
General
