127
Settings and Adjustments
Configuring on the station
4
How to configure Scan Monitoring
(1) Tap [Scan Monitor Settings] on the Monitor Settings screen.
– The Scan Monitor Settings screen will be shown.
(2) Tap [NEW] and configure the stations and network cameras to perform scan monitoring.
– To change a registered station or network camera, tap the station or network camera to change, and tap
[EDIT].
– To delete a registered station or network camera, tap the station or network camera to delete, and tap
[DELETE].
– The Scan Monitor Stations screen will be displayed.
(3) Tap the stations and network cameras to perform scan monitoring.
– Refer to
“Searching for stations (→page 32)” to search stations.
(4) Tap [ENTER].
– The Scan Monitor Settings screen will be shown.
(5) Tap [SELECT].
– The settings will be saved.
To Next Page
Loading...
