90
How to use
Other functions
3
Sending an email
An email can be sent to pre-registered email addresses using Email Event Trigger.
For how to configure email settings, refer to
“Email (→page 186)”.
Example of sending email:
When placing a call to the Door Station 3 (Station Number: 003, Station Name: Door Station 3, Location: Reception
desk) from this station (Station Number: 002, Station Name: Intercom Station 2, Location: Fire Prevention Center)
with the "Priority" priority.
Source △△△△@△△△△△.com
Date and time 11/20/2018 7:22
To
CC
××××@×××××.com
Subject 002 Intercom Station 2 Priority Outgoing Call
Description A call was made at [20181120 07:21:00].
Source Station Number: [002]
Source Station Name: [Intercom Station 2]
Source Station Location: [Fire Prevention Center]
Call Priority: [Priority]
Destination Station Number: [003]
Destination Station Name: [Door Station 3]
Destination Station Location: [Reception desk]
Note
• "UTF-8" is used to encode the "Subject." Characters may display incorrectly depending on the email client. To avoid this, set
the encoding method to "UTF-8."
When triggering event occurs
Send the email automatically
Mail Server
Email
To Next Page
Loading...
