182
Settings and Adjustments
Station programming
4
Paging Settings
Paging Origination
*1 Indicates a required field. Use the default values, unless a change is necessary.
Option Input Page
Option Input Page. Configure this if the Option Input function (administrator setting) is set to "Paging," "Message
Page," or "External Input Page."
Important
• All pages, group pages, message pages, and external input pages cannot be sent to a VoIP Phone.
Entry Description Settings Default values
Paging Timeout [sec]
*1
Set the time for outgoing paging duration. 10 - 600 sec (by 1 sec) 30 sec
Paging Wait Timer [sec]
*1
Set the time to wait for a response from all
destination stations when outgoing paging is
activated. Paging starts after this time without a
response form all destination.
1 - 20 sec (by 1 sec) 10 sec
Important
• A page may not be sent to a station if a response is received after the "paging wait timer" elapses. If multiple stations receive
pages, configure a longer paging wait timer.
Note
• Configure the pretone when a page is received in "Volume / Tone" - “Paging Pretone (→page 220)”.