37
How to use
Placing / Answering a Call
3
Calling a Group
Place an outgoing call to all stations that belong to the selected group, and communicate with the first station to
answer.
1. Lift the handset.
• If there is no handset, proceed to the next step.
• If the handset is lifted after specifying a group,
the call will be placed under [Normal] priority.
2. Specify the group to call.
• Choose a group using the methods below.
– “Selecting / Choosing / Calling by Number
(→page 30)”
– “Specify a station or group using the address
book. (→page 31)”
3. Tap [CALL], [PRIORITY CALL],
or [URGENT CALL].
• The group call will be placed with the selected
priority.
• The ringback tone is heard from the handset or
the built-in speaker.
• Refer to (page 74, page 78, and page 79) for
operations when making an outgoing call.
4. Speak when the other party
answers
• For how to use the screen during a call, refer to
(→page 18).
• Refer to (page 71 through page 80) for
operations during a call.
• If the other party uses a VoIP Phone, the
image may not be displayed depending on the
specifications and configuration of the VoIP
Phone.
5. When the communication ends,
hang up handset or tap .
To Next Page
Loading...
Need help?
General
