56
How to use
Monitoring
3
Monitoring a door station
Video and audio of a station and network camera can be monitored.
For stations without cameras, only audio will be heard while monitoring. Master Stations, VoIP phones, and groups
cannot be monitored.
Audio of the station that initiates monitoring cannot be heard by the other party during monitoring. However, the other
party may be notified that they are being monitored (a notification tone or flashing LED), depending on the
configuration of the other station. It may not possible to monitor the other station when the chime is playing on this
station of the other station, or when the other station is placing a call, receiving a call, receiving a page, or during
communication depending on the settings.
1. Tap [Monitor] on the Home
screen.
2. Select a station to monitor.
• Refer to (→page 32) for how to search
stations.
3. Tap [MONITOR].
• The calling tone plays until monitoring begins.
4. View the video and audio.
• Refer to (page 71 and page 75 through
page 79) for operations during monitoring.
5. To end monitoring, tap .
To Next Page
Loading...
