58
How to use
Monitoring
3
Scan Monitoring
Video and audio of multiple pre-configured stations or network cameras can be monitored, automatically and in order.
This function can be configured in
“Monitor Settings (→page 126)”.
For stations without cameras, only audio monitoring will be performed. IX-MV7-*, IX-MV and VoIP phones cannot be
monitored.
Audio of the station that initiates monitoring cannot be heard by the other party during monitoring. However, the other
person may be notified that they are being monitored (a notification tone or flashing LED), depending on the
configuration of the other station. It may not possible to monitor the other station when the chime is playing on this
station, or when the other station is placing a call, receiving a call, receiving a page, or during communication
depending on the settings.
1. Tap [Monitor] on the Home
screen.
2. Tap [SCAN MONITOR].
• The calling tone plays until scan monitoring
begins.
3. View the video and audio.
• Tap to stop automatically switching video
and audio. Video and audio from the currently
displayed station will continue to be monitored.
• : Press this to switch monitoring to the
previous station.
• : Press this to resume scan monitoring.
• Refer to (page 71 and page 75 through
page 79) for operations during monitoring.
Pause
To Next Page
Loading...
Need help?
General
