170
Settings and Adjustments
Station programming
4
Network Settings
Video
■ Master Station Video Setting
*1 Indicates a required field. Use the default values, unless a change is necessary.
Important
• When sending video to a VoIP Phone, configure the same video settings as the VoIP Phone.
• Video is not sent when making an outgoing call to a VoIP Phone.
• When the "Frame Rate" is set to 7.5, 10, 15, 20 or, 30 fps, after approximately 10 minutes following the start of an outgoing
call, the frame rate will automatically drop to 5 fps.
Note
• The frame rate or bit rate may be lower than the set value depending on the video being sent, the number of recipient stations,
and the network environment.
Entry Description Settings Default values
Video Streaming Select Enable / Disable for Video Streaming
of IX-MV7-*. Video cannot be distributed to
3rd party products not compatible with
ONVIF or to IX-MV. The Video Codec is
H.264 / AVC.
• Enable
• Disable
Enable
Frame Rate [fps] Set the Frame Rate [fps]. 0.5, 1, 2, 3, 5, 7.5, 10, 15, 20,
30
15
Select Profile Set the profile for Video Streaming. • Baseline
• Main
• High
Main
I-picture interval
*1
Select the interval to send I-picture for Video
Streaming.
1 - 100 15
Bit Rate [kbps] [H.264/
AVC]
Select the bit rate [kbps]. 32, 64, 128, 256, 384, 512,
768, 1024, 2048
1024
To Next Page
Loading...
