Aiphone IX SERIES User Manual

73
How to use
Operations while placing a call, in communication,
paging and monitoring
3
Placing a call on hold
When on a call, the call can be put on hold temporarily.
The on-hold tone will play on the other station while it is on hold.
1. Tap during a call.
• The call will be placed on hold and the transfer
destination search screen is displayed.
2. To resume the call, tap [HOLD
CANCEL].
• Resume communication.
Note
• When hang up the handset while the call is on hold, the call
will be terminated.
• It is possible to transfer a call while it is on hold.
(→page 65)
• The video from the station is not sent to the other station
while that station is on hold.

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom