Aiphone IX SERIES User Manual

204
Settings and Adjustments
Station programming
4
Transfer Settings
Configure settings related to absent transfer, delay transfer, and schedule transfer.
*This is an administrator privileges setting. If "LOCK TRANSFER SETTINGS" is set to "ON," this cannot be
configured under user privileges.
Absent Transfer
If an incoming call is received during absent transfer, the incoming call will be automatically transferred to a transfer
destination.
■ Absent Transfer
■ Transfer Destination List
Important
• When an incoming call is received from a VoIP Phone, the call will be received without transferring even when transfer is set.
To transfer the call, configure transferring on the IP-PBX.
Entry Description Settings Default values
Absent Transfer Select Enable / Disable for Absent Transfer. To
enable "Absent Transfer", set
“Transfer
Destination List (→page 204)”. The TRANSFER
button shown on this station's screen can also
be used to change the setting.
• Disable: Do not set
absent transfer
• Enable: Set absent
transfer
Disable
Entry Description Settings Default values
Station Number Configure the transfer destination station
(Number) for absent transfer. Up to 10 transfer
destination stations can be configured.
However, if the station making the outgoing call
is IX-MV, IX-DA(-*), or IX-BA, the transfer will be
made only to the station entered in "No.01."
IXW-MA cannot be configured as a transfer
destination.
3-32 digits -

Aiphone IX SERIES Specifications

General

Series	IX Series
Communication	IP Network
Audio	Yes
Video Codec	H.264
Network	Ethernet
Video	Yes
Integration	Yes
Security	Encrypted Communication
Power	PoE (IEEE 802.3af)
Video Resolution	720p HD
Audio Codec	G.711
Mounting	Wall Mount
Relay Outputs	Yes
Inputs	Yes
Relative Humidity	90% or less, non-condensing
Audio Output	Speaker (Internal or External)
Audio Input	Built-in Microphone
Type	Video Intercom