39
How to use
Placing / Answering a Call
3
Use an external device to place a call
Use an external device (sensor, call button, etc.) to place a call to a pre-determined location.
1. Activate the external device
• The ringback tone will play from the speaker of
the station.
2. Speak when the other party
answers
• Lift the handset to switch to handset
communication.
• For how to view the screen during a call, refer
to (→page 18).
• Refer to (page 71 through page 80) for
operations during a call.
3. To end communication, hang up
the handset or tap .
Call button, etc.
Input
Outgoing call
Station (IX-MV7-*)
To Next Page
Loading...
