35
How to use
Placing / Answering a Call
3
Placing a Call
1. Lift the handset.
• If there is no handset, proceed to the next step.
• If the handset is lifted after specifying a station,
the call will be placed under [Normal] priority.
2. Specify a station to call.
• Choose a station using the methods below.
– “Selecting / Choosing / Calling by Number
(→page 30)”
– “Specify a station or group using the address
book. (→page 31)”
3. Tap [CALL], [PRIORITY CALL],
or [URGENT CALL].
• The call will be placed with the selected
priority.
• The ringback tone is heard from the handset or
the built-in speaker.
• Refer to (page 74, page 78, and page 79) for
operations when making an outgoing call.
4. Speak when the other party
answers
• For viewing the screen during communication,
refer to (→page 18).
• Refer to (page 71 through page 80) for
operations during a call.
• If the other party uses is IX-MV7-* or a VoIP
Phone, the image from the camera on this
station will be displayed on the other party's
station.
However, the image may not be displayed
depending on the specifications and
configuration of the VoIP phone.
5. When the communication ends,
hang up handset or tap .
To Next Page
Loading...
Need help?
General
