114
Settings and Adjustments
Configuring on the station
4
Transfer Settings
Configure settings related to absent transfer, delay transfer, and schedule transfer.
*This is an administrator privileges setting. If "LOCK TRANSFER SETTINGS" is set to "ON," this cannot be
configured under user privileges.
• Absent Transfer:
An incoming call can be automatically transferred to the transfer destination if it is received while absent transfer is
set.
• Delay Transfer:
An incoming call can be automatically transferred to the transfer destination if it is received when delay transfer is
set and not answered over a certain period of time (Delay Time).
• Schedule Transfer:
An incoming call can be automatically transferred to the transfer destination, if an incoming call is received during
the time configured in the weekly schedule or daily schedule.
1. Tap [Transfer] on the Settings (1/2) screen.
• The Transfer Settings screen will be shown.
2. Configure the settings.
Important
• When an incoming call is received from a VoIP phone, the call will be received without transferring even when transfer is set.
To transfer the call, configure transferring on the IP-PBX.
To Next Page
Loading...
