60
How to use
Using Speed Dial Buttons
3
Using Speed Dial Buttons
The Speed Dial buttons can be used to quickly perform functions that have been pre-assigned.
These functions can be configured in
“Speed Dial Settings (→page 147)”.
Home Screen 1
Tap [Favorites] on the Home Screen to display the Speed Dial
buttons.
Home Screen 2
The Speed Dial buttons are displayed on the Home Screen.
Function icon
Description
Home Screen 1 Home Screen 2
Tap to place a normal call to a pre-configured station or group.
Tap to place a priority call to a pre-configured station or group.
Tap to place an urgent call to a pre-configured station or group.
Tap to start a normal page, normal message page, normal all page, or normal all
message page to a pre-configured group.
Tap to start an urgent page, urgent message page, urgent all page, or urgent all
message page to a pre-configured group.
Tap to monitor a pre-configured station or network camera.
Tap to scan monitor a pre-configured station or network camera.
Tap to operate relay output for the pre-configured station. During relay control,
[Processing…] will be displayed and the button will turn yellow.
However, the display and operating state may vary in the following situations.
• Relay output is operated by another station
• Relay Output was reset by the destination station during Relay Output.
When operating relay output for multiple stations at the same time, processing may
take some time.
Note
• A VoIP Phone cannot be paged, message paged, monitored, or scan monitored.
Function icon
Speed Dial button name
Function icon
Speed Dial button name
To Next Page
Loading...
Need help?
General
