129
Settings and Adjustments
Configuring on the station
4
3. Tap [Back].
• The settings will be saved.
Entry Description Settings Default values
MANUAL RECORD Select ON / OFF for manual recording. • ON
• OFF
ON
TRIGGER EVENT Configure the trigger in use to start
recording video/audio automatically.
Select from the following.
(Multiple selections allowed)
• Call: Record start when
station receives Incoming
Call. If a call is
automatically answered,
recording will start when
communication starts.
• Communication: Recording
starts when communication
begins.
• Monitor: Recording starts
when monitoring begins.
Recording is not possible
during Scan Monitor.
Not selected
RECORD TIMER Set the recording duration when the event
trigger has occurred.
• Disable: Does not stop until
the operating status ends or
the record button is tapped.
• 5 sec
• 10 sec
• 30 sec
Disable
PREVENT
OVERWRITE
Set prevent overwriting the old recorded file,
when the number of saved video/audio files
or microSD card capacity space is full.
• ON (do not overwrite)
• OFF (overwrite)
OFF
Note
• If "Record Event" is set to "Incoming Call" and multiple calls are received, video/audio is recorded from the first call. Other calls
will begin video/audio recording when the first calls ends or when the call is answered.
To Next Page
Loading...
Need help?
General
