185
Settings and Adjustments
Station programming
4
Network Camera Integration
■ Event Registration
Settings configured under administrator privileges are displayed for items except for "Event Tone" and "Play count of
Event Tone."
■ Play count of Event Tone
Entry Description Settings Default values
Event Tone Select the tone to be played when receiving
event from the network camera.
This can be configured for each event.
• None
• Call Pattern 1
• Call Pattern 2
• Call Pattern 3
• Call Pattern 4
• Call Pattern 5
• Call Pattern 6
• Tremolo Sound
• Busy Response Tone
• On Hold
• Operation Sound
• Error
• Pre Tone 1
• Pre Tone 2
• Pre Tone 3
• Communication End
Pretone
• Call Queue Notification
• Waiting Reply Tone
• Select a sound that is
registered in
“Custom
Sound Registry
(→page 172)”.
Call Pattern 3
Entry Description Settings Default values
Play count of Event Tone Set the play count for Network Camera Event
Tone when Function is set to "Monitor."
The ringtone count will be the same for all
network cameras and events registered to the
station. If "Call" is set, the ringtone count for the
event notification tone will be one time only.
• 1-20 rings
• Infinite: Play the
ringtone while receiving
an event that occurred
on the network camera.
1
To Next Page
Loading...
Need help?
General
