66
How to use
Transfer
3
Receive a transferred call
1. When receiving a call from the
transfer source, lift the handset or
tap .
2. Speak with the transferring station.
3. When the transferring station
hangs up, the call is transferred
and communication can begin.
Note
• It may not be possible to transfer calls, depending on the
configuration of the transfer destination station.
• If the transfer destination ends the call first, the
communication with the station that placed the call will
resume.
• Transferring a call from a station with a camera will transfer
the video as well.
• If the transfer destination is a group, the call can be
transferred to the first station that answers.
• If the configured call duration with the held station elapses
during the call with the transfer destination (if calling a VoIP
phone, the duration configured in this station or the VoIP
phone, whichever is shorter), the call with the held station
will be automatically ended. A notification tone will be
played approximately 10 seconds prior to the call ending,
but the call cannot be extended. The notification tone may
not play, depending on the configuration.
• If transferring is configured on the transfer destination
station, the outgoing call will be made according to the
configuration.
To Next Page
Loading...
Need help?
General
