282
TROUBLESHOOTING
Code No. /
functions
Operational procedure / display contents
80
EEPROM
dip switch 1
81
EEPROM
dip switch 2
82
EEPROM
dip switch 3
83
EEPROM
dip switch 4
84
EEPROM
dip switch 5
85
EEPROM
dip switch 6
(monitor
mode only)
Monitor mode
Displays EEPROM dip switch 1 status (code No. 80) / EEPROM dip switch 2 status (code No. 81)
/ EEPROM dip switch 3 status (code No. 82) / EEPROM dip switch 4 status (code No .83) /
EEPROM dip switch 5 status (code No. 84) / EEPROM dip switch 6 status (code No. 85).
In the case of EEPROM dip switch 3 status "Pin 4 ON"
Pin status are as follows
on : ON
oF : OFF
In the case of EEPROM dip switch 4 status "Pin 1 OFF"
※ The [INDOOR UNIT] switch changes displayed EEPROM dip switch. By pressing ON,
display toggles as follow [pin 1] → [pin 2] → ··· → [pin 8] → [pin 1] → ···.
Check mode
Programs each pin of EEPROM dip switches.
(EEPROM dip switches 4 ~ 6 set programming is not available.)
Example) Method of pin 5 of EEPROM dip switch setting
Select command (Initial display) Displays pin 1 status
↓
Press the [INDOOR UNIT] switch 4 times
Select command Select pin 5
↓
Press [SET] switch
During command setting
→
←
ON/OFF changes with [UP] or [DOWN] switch
↓
Press [SET] switch
↓
Press [SET] switch
Return to select command (setting is completed) Pin 5 setting Completed
Pin 5 is ON. Pin 5 is OFF.
To Next Page
Loading...