75
REPLACEMENT OF MAIN COMPONENTS
4) Mount the brackets (both sides) and tighten 4 bolts.
5) Fix the engine by tightening 2 bolts of engine mount
(both sides).
6) Mount 3 compressor brackets to the engine and
tighten 11 connecting bolts (2 of the bolts are
installed from the engine side).
7) Mount the rear side bracket and tighten 4 bolts in
the order shown right.
Bracket
Bolts (4 pieces)
Tightening torque 14.8 lb·ft (20.0 N·m)
Engine mount
Bolts
Tightening torque 31.0 lb·ft (42.0 N·m)
Bolts
Bolts
Bolts (installed from the engine side)
Tightening torque 31.0 lb·ft (42.0 N·m)
④
①
②
③
Rear side
①④ Tightening torque 14.8 lb·ft (20.0 N·m)
②③ Tightening torque 31.0 lb·ft (42.0 N·m)
To Next Page
Loading...