Akai MPC Touch User Manual

158
When Link Slices is enabled, changing the start point of a slice will also change the end point of the
previous slice. Similarly, changing the end point of a slice will also change the start point of the next
slice. Disable Link Slices if you are trying to create slices that use non-contiguous parts of the sample.
To enable or disable this feature, tap the Link Slices button.
Important: Link Slices must be disabled to make slices nonsequential, noncontiguous, or overlapping.
To remove all slices from a sample, press and hold Shift and tap Clear All.
The cue playhead is useful when manually inserting slice markers. You can set its position and behavior
to suit your workflow.
Use the Cue field to adjust the position of the cue playhead. Alternatively, tap and drag the translucent
marker with the triangle (X).
To play the sample from the cue playhead, tap Play Cue at the bottom edge of the touchscreen.
To create a slice marker at the cue playhead position, tap Slice+ at the bottom edge of the touchscreen.
To set how the cue playhead behaves, use the Settings window (see below).
0 Snap forces start points and end points to occur only at the waveform’s “zero-crossings.” This can
help to avoid clicks and glitches when playing a sample.
To enable or disable 0 Snap, press and hold Shift, and then tap 0 Snap at the bottom edge of the
touchscreen.

Akai MPC Touch Specifications

General

Display type	LED
Built-in display	Yes
Product color	Black
USB direct playback	-
Built-in optical drive	No
Audio (L/R) in	2
Minimum RAM	4 GB
Minimum processor	Dual Core
Minimum processor speed	2.5 GHz
Minimum storage drive space	2048 MB
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 8