183
After you stop your recording, the Keep or Discard Sample window will appear.
Keeping or discarding the recorded sample.
Use the Edit Name field to name the new sample. Tap it and use the virtual keyboard that appears.
Use the Program field to assign the new sample to a program. Select <none> if you want to save it to
the project without assigning it to a program.
Use the Assign to Pad field to assign the sample to a pad in the program. If you recorded a sample
while a sequence was playing, this window will show a few additional options if you select a pad. See
the next page to learn more.
Use the Root Note field to set where the sample’s original pitch will be on the keyboard.
To confirm your selections, tap Keep at the bottom edge of the touchscreen.
To discard the recording and return to the Sampler, tap Discard at the bottom edge of the touchscreen.
To play the recording, tap Play at the bottom edge of the touchscreen.
Tip: We recommend editing your recorded sample in Sample Edit Mode.
To Next Page
Loading...
