AKYAPAK-AHS-UserManual-2019.03.11
DESCRIPTION, USAGE AREAS AND CONDITIONS OF THE MACHINE
• Plate bending machine is designed to bend materials as cylindrical full circles (tube),
half circles, arcs and cones.
• Plate bending machine bends sheets with the thickness and width as specified in its
specifications.
• Machine is protected with various sheet construction housings.
• It is intended for bending plates within the limits specified in technical specifications
as per the safety, operation and maintenance instructions given in the operation
manual of the machine.
• Bending operation shall be performed with utmost care.
• Operator shall have adequate training for the operation and maintenance of the
machine, and shall be at the proper age as per the legislation of the relevant country.
• Use the protection and safety equipment specified in operation manual. Also, use the
personal protective equipment and/or other protective equipment required as per
the operation conditions.
• Safety measures include the operation of the machine as specified above.
• Use the drilling machine rationally and carefully to ensure operator safety and to
increase life cycle of the machine.
• Read the manual carefully after receiving the machine, and then operate it.
• As the plate bending machine is manufactured with advanced technology, proper use
and a good maintenance plan would increase the efficient life cycle of the machine.
• Human errors and improper use may cause serious damage to the machine. This may
increase the wear of parts and even cause serious safety risks for the operator.
To Next Page
Loading...
