AKYAPAK-AHS-UserManual-2019.03.11
PRESS EMERGENCY STOP BUTTON IN CASE OF AN EMERGENCY OR PRESS ON THE ROPE
AROUND THE MACHINE
• Press emergency stop button in case of an emergency or press on the rope around
the machine.
• Stop the machine before maintenance and cleaning.
• Never remove the safety plates.
POSSIBLE RISKS ON THE MACHINE
Precautions for risks are taken on AKYAPAK 4 roll cylinder.
For example:
• Electrical installation is protected with a metal cover.
• Another dangerous area is where the rolls rotate. Risky conditions may occur in case
of wrong and erratic operation.
• Safety rope is placed around the machine against accident during operation.
RISK OF DAMAGE
• Operator's fingers and hands
• Operator's clothing and other belongings
• Deformed operating material
• Third persons in material bending
• Bending materials for the machine
Anyone who will be operating, installing and maintaining the machine shall read the
operation manual with an applied and active manner. Do not try to bend hard materials
other than aluminium and metal sheets; you may hurt yourself or cause damage to the
To Next Page
Loading...
