AKYAPAK AHS - Oil Reservoir and Motor Rotation

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 39/94
AKYAPAK-AHS-UserManual-2019.03.11
PRE-INSPECTIONS
SAFETY ROPE
Safety rope placed around the machine is removed during transport (depending on the
dimensions of the machine and the area). This shall be done after the placement of the
machine. Safety rope is placed on three sides of the machine. Corner pieces are used to
strengthen the rope. Place these pieces on the machine and tighten their screws. Place the
rope on roll wheels and tighten it. Safety rope is placed for emergency conditions. Pressing
on the rope slightly shall be enough to stop the machine. You shall pull the button up to
operate the machine again.
Instead of safety ropes are not used for big machines that are located in a pit, emergency
stop buttons are located on top of the machine for safety purposes ( 2 emg stop buttons on
the top roll between 390-510 mm and 4 emg stop buttons over 540 mm)