AKYAPAK AHS - Lubrication, Filter, and Repair

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 63/94
AKYAPAK-AHS-UserManual-2019.03.11
FIGURE 1
FIGURE 2
1) ADJUSTMENT OF EVENNESS OF SIDE ROLLS
Ensure that conical bending device is turned off before performing the pre-operation
described above. If x>y, adjustment screw (A) is rotated counter-clockwise.
If x<y, adjustment screw (A) is rotated clockwise.
If x=y, rolls are parallel.