AKYAPAK AHS - Protection of Operator; Safety Factors in the Machine Installation; Safety Precautions; Check These Safety Precautions

A: Akçalar Sanayi Bölgesi Sanayi Cad.
No: 8/A 16225 Akçalar BURSA / TURKEY
T: +90 224 280 75 00
F: +90 224 280 75 01
E: info@akyapak.com.tr
W: akyapak.com.tr
Page: 15/94
AKYAPAK-AHS-UserManual-2019.03.11
PROTECTION OF OPERATOR
Operator is not required to other precautions under normal operating conditions of the
machine.
During operation:
Employees shall wear steel boots against the risk of dropping material and work gloves for
the handling of the machine. Qualified staff shall have proper equipment for machine
maintenance.
• Screwdriver set
• Allen set
• Wrench set
• Lubrication gun
• Gloves
• Steel boots
SAFETY FACTORS IN THE MACHINE INSTALLATION
AKYAPAK machine shall be placed on a hard and level ground (check the placement plan).
Machine may cause serious damage and accident if it is tipped over.
Material that is not properly installed cannot be bent correctly. Moreover, wrong placement
of the material may cause damage.
If the machine is stored, it shall be covered with tent and protected against dust.
SAFETY PRECAUTIONS
Safety precautions of 4 roll cylinder machine is given below. A check list is added to ensure
that these precautions are checked by the operator.
CHECK THESE SAFETY PRECAUTIONS
• Always check these factors before any shift.
• Please check the safety points regularly every week.
• Check these safety precautions after any maintenance operation.